previous arrow
next arrow

Hospital Elevator

Dazen elevator is the largest hospital elevator manufacturer, supplier and service provider in china. We provide a wide range of lifts for hospitals, hotels, shopping malls, and residential and office buildings.




What is a Hospital Elevator?

Hospital elevators are particular types of elevators that are used to transport patients and medical staff in hospitals. These types of elevators are designed to meet the needs of patients, such as ensuring their comfort, safety, and privacy. Hospital elevators may be equipped with several features that make them more suitable for transporting patients, such as stretchers or gurneys for wheelchairs, as well as buttons for operating the elevator from a wheelchair or bed.

Hospital elevators are usually located on hospital floors where they can provide easy access to emergency rooms and other essential departments. Different types of conventional hospital elevators are available in the market today, including electric-powered and hydraulic-powered models. The electric-powered models use electricity to lift the elevator car, while hydraulic models use pressurized oil to lift the vehicle.

Hospital Elevator

Hospital Elevator



General Requirements for Hospital Medical Elevators

1. Medical elevator is a special elevator that needs to be able to accommodate a variety of instruments and hospital beds, so the medical elevator of each manufacturer has only one specification; Mitsubishi is 1800kg, other manufacturers have 1600kg, but each family is not 1000kg, or 1000kg is not a medical elevator, because the hospital bed is not into the.

2. Medical elevators have special requirements for levelling, vibration and noise, which can not be replaced by ordinary passenger elevators.

3. Mitsubishi medical elevator data: LECHY-B series medical elevator, cabin size 1500* 2500, shaft size: 2300* 3150 (through the door); pit size: 1450mm and top floor height 4650, open the door size 1200* 2100.

4. The maximum speed of the LECHY-B medical elevator is 1.75m/s, and the maximum lifting height is 80m. If your hospital exceeds this height, you should use Mitsubishi’s imported medical elevator, but the price will be higher. Japanese requirements for medical elevators, fire elevators, and freight elevators are very high; the price is also very high 

5. 1050kg LEHY passenger elevator car inside size 1600 * 1500 (this size can enter a wheelchair at most), shaft size 2050 * 2090. but the speed can be increased to 2.5m / s.

General Requirements for Hospital Medical Elevators

General Requirements for Hospital Medical Elevators



What is the Function of a Hospital Elevator?

The functions of hospital elevators include:

Assist doctors, patients and visitors in moving between levels in a hospital.

Provide access to medical equipment storage areas and the basement of a building.

Allow for the safe evacuation of patients during an emergency.

Elevators are often used to transport patients who require assistance to reach the proper floor in a hospital building. They can also be used to transport equipment, such as oxygen tanks, blood bags or other supplies, and medical personnel when moving between departments within a hospital building.

Function of a Hospital Elevator

The function of a Hospital Elevator



How Do Hospitals Use Elevators?

Hospitals are complex institutions requiring many elevators to move patients and staff around the facility.

Because hospitals are highly regulated and must follow strict protocols for cleanliness, efficiency and safety, it’s essential for them to know how best to use their elevators to meet those needs.

In general, hospitals have two types of elevators: freight and passenger. Freight elevators are used mainly for moving supplies and equipment around the hospital. Passengers ride on these elevators, but they aren’t intended as primary transportation for people.

Passenger elevators typically travel up to 10 miles per hour (mph), while freight elevators travel between 4 mph and eight mph. Passenger elevators can also be designated express or local, depending on their destination floor numbers. Express elevators stop only on particular floors while local stops on every floor.

Many other factors affect how hospitals use their elevators, including:

The number of passengers using the elevator at any time (the maximum allowable load).

The amount of weight being carried by each person (the maximum allowable weight).

Whether or not someone is pushing a wheelchair or cart through the stairwells in lieu of taking an elevator ride.

How Do Hospitals Use Elevators?

How Do Hospitals Use Elevators?



Which Elevator Should You Get on in a Hospital?

There are two kinds of elevators in hospitals: express and local. Express elevators make fewer stops than local elevators and can take you farther away from your destination.

The main thing to know about hospital elevators is that they are not on the same system as the rest of the building. Most large hospitals have multiple elevator systems, so there may be one set of express elevators and another set of local elevators. This is because the hospital has so many floors, each requiring its own elevator system.


Express Elevators

Express elevators travel between different floors quickly, but they don’t stop at every bottom as local elevators do. They are often located at the end of a hallway or near the stairwells so they can quickly get patients to their destinations without having to stop at every floor along the way. Some people dislike express elevators because they often feel like they are going down instead of up when riding them!


Local Elevators

These are sometimes called patient care elevators, but they’ve usually marked “Authorized Personnel Only.” They’re generally safe unless you’ve been given special permission from the hospital staff to use them — and even then, use them at your own risk!


Are There Different Speeds for Hospital Elevators?

Yes, there are different speeds for hospital elevators.

The most common speed for hospital elevators is between 1 and 3 miles per hour (mph). These elevators are used in facilities with many people who need to travel up or down floors quickly or who have difficulty walking long distances.

There are also faster speeds for hospital elevators that can go up to 10 mph. These elevators can be installed in facilities where not many people travel at one time, but they are often used in areas where people may want to travel at a faster pace.

There are also slower speeds that can be installed if you want to take the time and effort to get from one floor to another while still maintaining safety and convenience.



How Big Are Elevators in Hospitals?

The size of elevators varies according to the needs of each hospital. The enormous elevator in a hospital is about 10 feet wide, 8 feet high and 20 feet long. The smallest elevator is about 7 feet wide and 6 feet tall.

The average weight limit for an elevator is 1,600 pounds, but some can hold up to 2,000 pounds. The maximum weight capacity depends on the size of the elevator and how many people are inside at once.

The maximum speed of an elevator is typically 12 mph (19 kph), although it depends on the type of elevator and how many floors it has to go through.

How Big Are Elevators in Hospitals?

How Big Are Elevators in Hospitals?



What Are the Requirements for Hospital Elevators?

The requirements for hospital elevators vary depending on the size of the building and its location.


In general, there are some basic requirements that all elevators must meet:

-They must be equipped with safety measures such as alarms or emergency stop buttons so that people can use them safely;

-They must be able to carry large loads (i.e., people) up and down without any problem;

-They should be able to run smoothly without jerks or stops;

-They should have electronic controls (i.e., computerized systems) that allow passengers to choose their destination floor before entering the elevator cabins;


Hospital elevators must meet stringent safety requirements to operate safely. These requirements include:

Emergency power

Fire detection and protection systems

Smoke detection systems

Door opening and closing devices


How Do Hospitals Use Elevators?

The elevator is essential in a hospital because it can transport patients from one floor to another.

An elevator is also a tool for medical staff and doctors who need to move quickly between floors and patient areas.

Hospitals use elevators in a variety of ways:

Elevators for patients – The primary purpose of the elevator is to transport patients from their rooms to other floors or locations within a facility, such as an operating room or emergency department.

Elevators for medical staff – Doctors and other medical professionals use these elevators to move quickly between floors and locations within their hospital.

Elevator safety – Hospitals also have to worry about safety issues that may arise if an elevator malfunctions. They must also ensure they comply with all applicable regulations regarding the proper use of elevators in hospitals.


How Much Does a Hospital Elevator Cost?

The cost of a hospital elevator will depend on the size and the features that it has. You should also consider the amount of time it will be in use and any special requirements for the installation.

Installing an elevator in a hospital is about $1,000 per square foot. This does not include the cost of the elevator itself or other equipment that may be necessary, such as electrical wiring or lighting. The average price for an elevator in a hospital is about $3 million.

The price also depends on whether you are installing one or two lifts at different levels and whether you need to install additional features like fire alarms or sprinklers. In addition, some hospitals want their elevators to accommodate patients who use wheelchairs or stretchers, which can add complexity to the installation process and increase costs.

Feature Stories & Articles